JS.Matgraf
Tooling for auxiliary machinery of 500 mm and 700 mm. Therefore, the quality of the materials must be long-lasting. Most of the machining of the drilling components are carried out by state-of-the-art machinery. (Machining centers, wire EDM cutting).
For this machine, its dies can be manufactured in all binding styles:
Wire-o (round or square) Spiral (round or oval) Puntille (Micro perforated comb) Hedder (Comb for folders or sub-folders). Snap-out (Dot Stripe).
Renz
The matrix has a support cover by which we can cancel any punch. The Ap360 die has two thick layers of wire EDM perforated material that has a lubrication strip so that it can be greased periodically for a longer useful life of the punches.
The cutting die consists of vacuum-tempered plates.
Bielomatik
The die for this type of drills has a very wide variety of models.
P12 / 49 P596
Q32 / 49 Q22 / 49
P35 / 49 Caps P12 / 48
P35 / 49 Sheets
The matrix consists mainly of pieces treated under vacuum to guarantee their duration by rubbing the punches. Parts in their entirety manufactured by wire electro-erosion and adjusted to the measures requested by customers. Formats of 1 or 2 lines and Wire-o or Spiral bindings.
Rilecar
Tool with great resistance to perforation and with its components seriously treated with different last generation frictions. The dies formed by vacuum treated nose pads for their long life due to the rubbing of the punches. Due to its wide base of the support of this matrix, different formats and several lines of holes can be made to suit the client. (1,2 or 3 lines of holes)
The binding formats are very wide.
Wire-o (with or without hanger)
Spiral (Round or Oval)
Multi-ring Puntille
Kugler
Tool with great resistance to perforation, with its components treated for their long life and with a lubrication strip to be able to grease the cutting punches and thus extend the useful life. The die is made up of vacuum treated nose pads to guarantee its durability due to the friction of the punches.
In its wide base as well as in its support, it allows variations in drilling lines and work formats, such as:
Wire-o (with or without hanger)
Spiral (with or without hanger)
Puntille Carpeteria Multianillas and Even blades for indexes. Snap-out
JBI
Tool with great resistance to perforation and with its components seriously treated with different state-of-the-art processes. The dies formed by vacuum treated nose pads for their long life due to the rubbing of the punches.
Due to its wide base of the support of this matrix, different formats and several lines of holes can be made to suit the client. (1,2 or 3 hole lines) The binding formats are very wide.
Wire-o (with or without hanger)
Spiral (Round or Oval)
Snap-out Multi-Ring Lace
Widmann
Matrix of high productions and large print runs. It consists of a pneumatic group with a piston included in the matrix structure. Its high performance materials allow all formats to be made with the most advanced wire electro-erosion techniques, thus being able to manufacture any format or figure that the client requests.
Due to the fact that it is a die designed for large productions and its performance and speed when drilling forces us to use materials with very high friction performance in both dies and punches and with a suitable heat treatment for their productions.
Especially this matrix is designed for work with plastics, PVC, Polypropylenes etc.
Services
Machining
Sharp
Rectified
Cut by Thread
Die Tooling Advice
Office Hours
Monday to Friday- 9:00 a.m. to 2:00 p.m.
Location
Calle Seva Nº 9 NAVE 2
(Pol.Ind. L'Ametlla Park)
08480- L'Ametlla del Valles
Barcelona
937,134,236